Want to ask Rick a tech question?
Step Two: Configure the server Wireless USB Print Server.
After the initial configuration, you can establish wireless a wireless print connection.We are constantly striving to provide users with the most helpful information.If you found this post useful, would you mind helping me out by sharing it?In the ssid field, you should enter the ssid of the wireless router or access point to which you will be connecting the wireless print server.Right-click the printer you just installed, select Properties, and then click Print Test Page.When finished, click Next.If you are able to print, your wireless connection is working correctly.Note: If you experience any problems or do reviews not see an asterisk next to the port name in the Printer Port Setup screen, click Refresh.Note: If your CD-ROM does not automatically launch, click Windows.Click here to join my, reviews ricks Tech Tips Facebook Group.Select the printer and click Connect.If the printer doesnt appear, click Add New Printer and follow the on-screen wireless instructions. Just click one print of the handy social media sharing buttons below.
If you do not see the correct printer port, click Refresh and it should appear.
To print a test page, click Windows Start, Control Panel, and then Printers and Faxes (This may be slightly different depending print on your operating system).
Step Five: Configure additional client computers To allow other computers on your network to print to the Wireless USB Print Server, you must perform the client computer lithos installation procedure on each computer.Disconnect the USB cable, the Ethernet cable, and visual the power adapters of the Wireless USB Print Server and your printer.Make sure you have them available font in case you need them.You can change heavy the Device Name, if you want, and enter a Domain Name.Follow the on-screen instructions to select the location for serial the PTP driver font and to install.Share the printing wirelessly, the speed up to 150Mbps. Click font OK on the message that appears.
Note: During the Installation procedure, you may be prompted for your Windows Operating system CD-ROM or for your printer manufacturer's CD-ROM.
Step Three: Install the PTP driver and configure the print driver Follow the on-screen instructions to select the location for the PTP driver and to install.
For the most updated configuration and troubleshooting information, visit the USRobotics Web wireless print server usb reviews site at m/support Register your product Launch a Web browser and register your product at m/productreg.
Note to UK Users: Attach the correct power plug to the power adapter.